Publications The following are papers, book chapters, proceedings, and presentations affiliated with Dr. Dickey. Papers (2004-present) G.J. Hayes, J.H. So, A. Qusba, M.D. Dickey, and G. Lazzi. “Flexible Liquid Metal Alloy (EGaIn) Microstrip Patch Antenna,” IEEE Transactions on Antennas and Propagation, Accepted July 2011. H-.J. Koo, J-.H. So, M.D. Dickey, and O.Velev. “Quasi-Liquid Memristors as Prototypes of All-Soft Matter Circuits,” Advanced Materials (In Press, July 2011). M.R. Khan, G.J. Hayes, J.H. So, G. Lazzi, and M.D. Dickey. “A Frequency Shifting Liquid Metal Antenna with Pressure Responsiveness,”Applied Physics Letters, 2011, 99, p. 013501. J.-H. So and M.D. Dickey. “Inherently Aligned Microelectrodes Composed of Liquid Metal,” Lab on a Chip, 2011, 11, p. 905-911. M.D. Dickey, K.J. Russel, D.J. Lipomi, V. Narayanamurti and G.M. Whitesides. “Transistors Formed from a Single Lithography Step Using Information Encoded in Topography,” Small, 2010, 6(18): p. 2050-2057. S. Elhadj, R. Rioux, M.D. Dickey, J. De Yoreo, and G.M. Whitesides. “Sub-nanometer Replica Molding of Molecular Steps on Ionic Crystals,” Nano Letters, 10(10): p. 4140–4145. C. Nijhuis, W.J. Reus, J. Barber, M.D. Dickey, M. Butte, and G.M. Whitesides. “Charge Transport and Rectification in Arrays of SAM-Based Tunneling Junctions,” Nano Letters, 2010. 10 (9): p. 3611–3619. M. Reches, K. Mirica, R. Dasgupta, M.D. Dickey, M. Butte, and G.M. Whitesides. “Thread as a Matrix for Biomedical Assays,” ACS Applied Materials & Interfaces, 2010. 2 (6): p. 1722–1728. J.H. So, J. Thelen, A. Qusba, G.J. Hayes, G. Lazzi, and M.D. Dickey. “Reversibly Deformable and Mechanically Tunable Fluidic Antennas,” Advanced Functional Materials, 2009. 19(22): p. 3632-3637. A.C. Siegel, S.K. Tang, C.A. Nijhuis, M. Hashimoto, S.T. Phillips, M.D. Dickey, and G.M. Whitesides. “Co-Fabrication: A Strategy for Building Multi-Component Microsystems,” Accounts of Chemical Research, 2009. 43(4): p. 518-528. . S.W. Thomas, S.J. Vella, M.D. Dickey, G.K. Kaufman, and G.M. Whitesides. “Controlling the Kinetics of Contact Electrification with Patterned Surfaces,” Journal of the American Chemical Society, 2009. 131(25): p. 8746-8747. A.C. Siegel, S.T. Phillips, M.D. Dickey, N. Lu, Z. Suo, and G.M. Whitesides. “Foldable Printed Circuit Boards on Paper Substrates,” Advanced Functional Materials, 2009. 20 (1): p. 28-35. R. J. Larsen, M.D. Dickey, G.M. Whitesides, and D. A. Weitz. “Flow properties of solid-coated liquids: a rheological study of oxide-coated liquid metals,” Journal of Rheology, 2009. 53(6): p. 1305-1326. E.J. Smythe, M.D. Dickey, G.M. Whitesides, and F. Capasso. “An Array of Optical Antennas on a Fiber Facet for In Situ Surface Enhanced Raman Scattering Detection,” Nano Letters, 2009. 9(3): p. 1132–1138. E.J. Smythe, M.D. Dickey, G.M. Whitesides, and F. Capasso. “A Technique to Transfer Metallic Nanoscale Patterns to Small and Non-Planar Surfaces,” ACS Nano, 2009. 3, 59-65. M.D. Dickey, D.J Lipomi, P.J. Bracher, and G.M. Whitesides. “Electrically Addressable Parallel Nanowires with 30 nm Spacing from Micromolding and Nanoskiving,” Nano Letters, 2008. 8 (12): p. 4568-4573. D.J. Lipomi, R.C. Chiechi, M.D. Dickey, and G.M. Whitesides. “Fabrication of Conjugated Polymer Nanowires by Edge Lithography,” Nano Letters, 2008. 8(7): p. 2100–2105. M.D. Dickey and G.M. Whitesides. “Unconventional Nanofabrication,” Pharma Focus Asia, Invited Article, May 2008. M.D. Dickey, E.A. Weiss, E.A. Smythe, R.C. Chiechi, F. Capasso, G.M. Whitesides. “Fabrication of Arrays of Metal and Metal-Oxide Nanotubes by Shadow Evaporation,” ACS Nano, 2008. 2(4): p. 800-8. M.D. Dickey, R.C. Chiechi, R.J. Larsen, E.A. Weiss, D.A. Weitz, G.M. Whitesides. “Eutectic Gallium-Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature,” Advanced Functional Materials, 2008. 18(7): p. 1097-1104. Q. Xu, R. Rioux, M.D. Dickey, G.M. Whitesides. “Nanoskiving: A New Method for Nanofabrication,” Accounts of Chemical Research, 2008. 41(12): p. 1566-1577. V. Ferri, M. Elbing, G. Pace, M.D. Dickey, M. Zharnikov, P. Samorì, M. Mayor, M.A. Rampi. “Light-powered Electrical Switch Based on Cargo Lifter Azobenzene SAMs,” Angewandte Chemie, 2008, 120 (18), p. 3455-7. (Featured on Cover) R.C. Chiechi, E.A. Weiss, M.D. Dickey, G.M. Whitesides. “Eutectic Gallium-Indium (EGaIn): A Moldable Liquid Metal for Electrical Characterization of Self-Assembled Monolayers,” Angewandte Chemie, 2008. 47(1): p. 142-4. M.D. Dickey, A. Raines, E. Collister, R. Bonnecaze, S.V. Sreenivasan, R.T. Bonnecaze, and C.G. Willson. “High-aspect Ratio Polymeric Pillar Arrays Formed Via Electrohydrodynamic Patterning,” Journal of Materials Science, 2008. 43(1): p. 117-22. M. D. Dickey, C.G. Willson. “Determination of the kinetic parameters for the Step and Flash Imprint Lithography photopolymerization,” AIChE Journal, 2006. 52(2): p. 777-784. M.D. Dickey, M.D. Stewart, D.A. Dickey, and C.G. Willson. “An automated statistical process control study of inline mixing using spectrophotometric detection,” Journal of Chemical Education, 2006. 83(1): p. 110-113. M. D. Dickey, S. Gupta, K.A. Leach, E. Collister, C.G. Willson, and T. P. Russell. “Novel 3-D structures in polymer films by coupling external and internal fields,” Langmuir, 2006. 22(9): p. 4315-4318. M.D. Dickey, E. Collister, A. Raines, P. Tsiartas, T. Holcombe, S.V. Sreenivasan, R.T. Bonnecaze, and C.G. Willson. “Photocurable pillar arrays formed via electrohydrodynamic instabilities” Chemistry of Materials, 2006. 18(8): p. 2043-2049. E.K. Kim, M.D. Stewart, K. Wu, F.L. Palmieri, M.D. Dickey, J.G. Ekerdt, and C.G. Willson. “Vinyl ether formulations for Step and Flash Imprint Lithography,” Journal of Vacuum Science & Technology, B, 2006. 3(6): p. 2967-2971. M.D. Dickey, R.L. Burns, E.K. Kim, S.C. Johnson, N.A. Stacey, C.G. Willson. “A study of the kinetics of Step and Flash Imprint Lithography photopolymerization,” AIChE Journal, 2005. 51(9): p. 2547-55. S.C. Johnson, R.L. Burns, E.K. Kim, M.D. Dickey, G.M. Schmid, J. Meiring, S.D. Burns, C.G. Willson, D. Convey, Y. Wei, P. Fejes, K. Gehoski, D. Mancini, K. Nordquist, W.J. Dauksher, and D.J. Resnick. “Investigation of etch barrier densification for Step and Flash Imprint Lithography,” Journal of Vacuum Science & Technology, B, 2005. 23(6): p. 2553-2556. K.A. Leach, S. Gupta, M. D. Dickey, C.G. Willson, and T. P. Russell. “Electric Field and Dewetting Induced Hierarchical Structure Formation in Polymer/Polymer/Air Trilayers,” Chaos, 2005. 15 (4): 047506. (invited paper) X. Yan, G. Liu, M.D. Dickey, and C.G. Willson. “Preparation of porous polymer membranes using nano- or micro-pillar arrays as templates.” Polymer, 2004. 45: p.8469-74. E.K. Kim, N.A. Stacey, B.J. Smith, M.D. Dickey, S.C. Johnson, B.C. Trinque, and C.G. Willson. “Vinyl ethers in ultraviolet curable formulations for Step and Flash Imprint Lithography,” Journal of Vacuum Science & Technology, B, 2004. 22(1): p.131-135. S.C. Johnson, R. Burns, E.K. Kim, G.M. Schmid, M.D. Dickey, J. Meiring, S.D. Burns, N.A. Stacey, C.G. Willson, D. Convey, Y. Wei, P. Fejes, K. Gehoski, D. Mancini, K. Nordquist, W.J. Dauksher, D.J. Resnick. “Step and flash imprint lithography modeling and process development,” Journal of Photopolymer Science and Technology, 2004. 17(3): p. 417-419. Book Chapters M.D. Dickey, M.D. Stewart, and C.G. Willson. “Advanced Lithography” in National Nanotechnology Infrastructure Network (NNIN) Open Textbook, Steve Campbell, editor. (Published on-line, 2007) Proceedings S. Lee, P. Carmichael, J. Meiring, M.D. Dickey, S. Grayson, R.T. Bonnecaze, C.G. Willson. “Modeling of Self-Assembly Dynamics of Photolithographically Patterned MUFFINS Biosensor Arrays,” MRS Conference Proceedings (Spring 2007) MRS, 2007. M.W. Lin, W.C. Kim, E.K. Kim, M.D. Dickey, H.L. Chao, F. Palmieri, P.S. Ho, C.G. Willson. ““Planarization materials for reverse-tone Step and Flash Imprint Lithography,” Proceedings of SPIE-The International Society for Optical Engineering, 2006. 6151: p.688-699. P. Tsiatras, M.D. Dickey, K. Allrich, C.G. Willson. “Photocurable pillar arrays formed via AC- and ultrasound-induced electrohydrodynamic instabilities,” Proceedings of SPIE-The International Society for Optical Engineering, 2006. 6151: p.920-926. M.D. Dickey, C.G. Willson. “Electrically induced pillar arrays formed using photocurable materials,” AIChE Conference Proceedings (Fall 2005 Cincinnati, OH) New York: AIChE, 2005. M.D. Dickey, A. Raines, E. Collister, C.G. Willson. “High aspect ratio pillar arrays formed via electrohydrodynamic instabilities,” AIChE Conference Proceedings (Fall 2005 Cincinnati, OH) New York: AIChE, 2005. M.D. Stewart, J.T. Wetzel, G.M. Schmid, F. Palmieri, E. Thompson, E.K. Kim, D. Wang, K. Sotodeh, K. Jen, S.C. Johnson, J. Hao, M.D. Dickey, Y. Nishimura, R.M. Laine, D. Resnick, C.G. Willson. “Direct imprinting of dielectric materials for dual damascene processing,” Proceedings of SPIE-The International Society for Optical Engineering, 2005. 5751(Pt. 1, Emerging Lithographic Technologies IX): p. 210-218. M.D. Dickey, E. Collister, E.K. Kim, C.G. Willson. “Tailoring photopolymerization materials for nanotechnology,” Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2004), 45(2), 126-127. M.D. Dickey, E. Collister, F. Palmieri, C.G. Willson. “Pillar arrays formed using photocurable materials,” AIChE Conference Proceedings (Fall 2004 Austin, TX). New York: AIChE, 2004. M.D. Dickey, C.G. Willson. “Effects of oxygen on Step and Flash Imprint Lithography photopolymerization kinetics,” Polymeric Materials Science and Engineering, (2004), 90 24-25. R.L. Burns, S.C. Johnson, G.M. Schmid, E.K. Kim, M.D. Dickey, J. Meiring, S.D. Burns, N.A. Stacey, C.G. Willson, D. Convey, Y. Wei, P. Fejes, K. Gehoski, D.P. Mancini, K. Nordquist, W.J. Dauksher, D.J. Resnick. “Mesoscale modeling for SFIL simulating polymerization kinetics and densification,” Proceedings of SPIE-The International Society for Optical Engineering, 2004. 5374 (Pt. 1, Emerging Lithographic Technologies VIII): p. 348-360. S.C. Johnson, T.C. Bailey, M.D. Dickey, B.J. Smith, E.K. Kim, A.T. Jamieson, N.A. Stacey, J.G. Ekerdt, C.G. Willson, D.P. Mancini, W.J. Dauksher, K.J. Nordquiest, and D.J. Resnick. “Advances in Step and Flash Imprint Lithography,” Proceedings of SPIE-The International Society for Optical Engineering, 2003. 5037 (Pt. 1, Emerging Lithographic Technologies VII): p.197-202. T.C. Bailey, S.C. Johnson, M.D. Dickey, B.J. Smith, A.T. Jamieson, E.K. Kim, N.A. Stacey, D. Mancini, W.J. Dauksher, K. Nordquist, D.J. Resnick, S.V. Sreenivasan, J.G. Ekerdt and C.G. Willson. “Recent Advances in Step and Flash Imprint Lithography." Proc. 39th Interface Symposium: 2002. Presentations No presentations featured at this time.